DFRobot PYNQ-Z2 Development Board
DFRobot PYNQ-Z2 Development Board is based on the Xilinx Zynq XC7Z020 System on Chip (SoC). The PYNQ-Z2 is designed to support PYNQ, an open-source framework that enables embedded programmers to explore the possibilities of Xilinx Zynq SoCs without having to design programming logic circuits. Benefiting from programmable logic and the advanced Arm processor in Zynq, designers can build up powerful embedded applications. The SoCs can be programmed in Python and the code can be developed and tested directly on the PYNQ-Z2. The programmable logic circuits are imported as hardware libraries and programmed through APIs in basically the same way that the software libraries are imported and programmed.
Features
ZYNQ XC7Z020-1CLG400C
650MHz Arm® Cortex®-A9 Dual-core ProcessorProgrammable logic
13,300 logic slices, each with four 6-input LUTs and 8 flip-flops630KB block RAM220 DSP slicesOn-chip Xilinx analog-to-digital converter (XADC)Programmable from JTAG, Quad-SPI flash, and MicroSD cardMemory and storage
512MB DDR3 with 16-bit bus @ 1050Mbps16MB Quad-SPI Flash with factory programmed 48-bit globally unique EUI-48/64™ compatible identifierMicroSD slotPower
USB or 7V to 15V external power regulatorUSB and EthernetGigabit Ethernet PHYMicro USB-JTAG programming circuitryMicro USB-UART bridgeUSB 2.0 OTG PHY (supports host only)
650MHz Arm® Cortex®-A9 Dual-core ProcessorProgrammable logic
13,300 logic slices, each with four 6-input LUTs and 8 flip-flops630KB block RAM220 DSP slicesOn-chip Xilinx analog-to-digital converter (XADC)Programmable from JTAG, Quad-SPI flash, and MicroSD cardMemory and storage
512MB DDR3 with 16-bit bus @ 1050Mbps16MB Quad-SPI Flash with factory programmed 48-bit globally unique EUI-48/64™ compatible identifierMicroSD slotPower
USB or 7V to 15V external power regulatorUSB and EthernetGigabit Ethernet PHYMicro USB-JTAG programming circuitryMicro USB-UART bridgeUSB 2.0 OTG PHY (supports host only)
Dfrobot Newest
DFRobot KIT0144 M1 Dock and KIT0145 M1W Dock Development Kits evaluate Kendryte (K210) artificial intelligence chips.
Date: 2019-09-18DFRobot Gravity: Throw-in Type Liquid Level Transmitter features high-performance pressure sensing chip with advanced circuit processing and temperature compensation technology.
Date: 2019-07-25DFRobot micro:IO Extender Board leads out all IO ports of micro:bit that are in accordance with Gravity standard interface.
Date: 2019-07-25DFRobot Raspberry Pi e-ink Display Module offers a 2.13-inch screen with a resolution of 250x122 and adopts an SPI interface to communicate with Raspberry Pi.
Date: 2019-07-25DFRobot URM09 Analog Ultrasonic Sensor is designed for fast ranging and obstacle avoidance applications with measuring frequency of up to 30Hz.
Date: 2019-07-25DFRobot micro: Breadboard is a micro:bit-based expansion board designed for STEM-starter. Now available at Mouser.
Date: 2019-07-25DFRobot Gravity Digital RGB LED Module is a single cascadable LED module that comes with RGB LED strip. Now available at Mouser.
Date: 2019-07-19DFRobot Micro IO-BOX Expansion Board is a micro:bit multifunctional expansion board with onboard Li-ion battery power. Now available at Mouser.
Date: 2019-07-19